Schill + Seilacher line of products
Beamhouse
  Solids or pH    
Product active materia Charge Characteristics New
Vinkol A 99% 7.5-8.5 enzime for soaking, resulting in cleanerand more open pelts,  
    anionic faster and more complete main soaking, less wrinkels  
         
Vinkol TG   8.0-10.0 liming auxiliary for cleaner and open pelts and less wrinkels,  
      in the imunization process does not let the lime imunize the ceratin  
         
Vinkol TGV   8.0-10.0 liming auxiliary for raw material with a hard and thick epidermis,  
      similar to Vinkol TG  
         
Vinkol LBA   0.5-1.5 fosfonic acid for washing pelts in the beamhouse, eliminating  
      lime blast after liming and lime washes  
         
Tanning/Pretanning
  Solids or pH    
Product active materia Charge Characteristics New
Derugan 3080 62% 2.8-3.8 pretanning agent for wet white on base of a modified and masked  
    non-ionic glutaraldehyde for splited and not splited pelts, special product  
      for car upholstery  
         
Ukatan 24 24% 3.0-4.0 tanning and retanning agent based on glutaraldehyde, good  
    non-ionic penetration is achived at lower pH, good alkali and sweat  
      resistance, gives fuller and more fluffier leathers  
         
Aglutan SO new     acid proteolitic enzimes to uniform blue stock, ranges are from pH x
      3.5 to 5.0 and temperatures up to 65°C, levels the differences of the  
      old blue stock and the dying  
         
Silastol 380 90% 6.0-8.0 special emulsifier to emulsify crome and lime soaps on wet blue,  
    anionic dispersion of natual oils and fats, suitable for car upholstery  
         
Pristolamin TA 55% 8.0-10.0 fatty acids derivate to uniform and dispers the natural fat of the  
    amfoteric hides in the leather, especially for pig, goat and sheep skins  
         
Perpristol TAN 100% 3.0-4.0 syntetic tanning oil based on parafin sulfoclorides for fat tanned  
    anionic skins and washable garment leather, eliminating spew problems  
         
Perpristol R 673 100% 1.0-2.0 similar to Perpristol TAN, but AOX free (free of organic clorides) x
    anionic    
         
Retanning
  Solids or pH    
Product active materia Charge Characteristics New
Derugan NF 20% 7.5-8.5 solution of a carboxylic polimer for the retanning and filling of the  
    anionic loose parts of the leather  
         
Ukatan AGF 94% 9.0-10.0 resin retanning agent free of formaldehyde, specialy for car x
    anionic upholstery  
         
Ukatan PRE 92% 10.0-12.0 organic aluminium complex for the retanning of loose raw material  
    amfoteric and splits, improves the crome exhaustion  
         
Ukatan GMF 94% 5.0-8.0 formaldehyde free naftalene syntan for car upholstery, specially x
    anionic for wet white, dispersing vegetable extracts and dyes  
         
Ukatan INF 96% 3.0-6.0 lightfast formaldehyde free fenolic syntan, specially for wet white x
    anionic car upholstery  
         
Ukatan FS 92% 5.0-8.0 special product to mask and eliminate free formaldehyde from the x
    anionic leather, specially for wet white  
         
Fatliquors
  Solids or pH    
Product active materia Charge Characteristics New
Lipsol SQ 90% 6.0-8.0 blend of natural and syntetic oils for soft leathers, no fogging,  
    anionic silky fatty felling, full fluffy leathers, good fibre binding, good grain  
      tightness  
         
Lipsol QBC 30% 5.0-7.0 modified oils with special polimers for car upholstery, lightfastness x
    anionic and heat resistence are exelent, no fogging, in combination with  
      other fat liquors, good softness  
         
Lipsol BSFR 66% 7.0-8.5 syntetic fatliquor for soft shoe upper leathers, very good grain x
    anionic thightness, good lightfastness, good fibre binding, uniform penetration  
         
Waterproof
  Solids or pH    
Product active materia Charge Characteristics New
Limanol PEW 42% 6.0-9.0 special emulsifier for waterproof sistems, use above pH 5,  
    anionic disperses and penetrats oils and dyes, does not afect  
      waterproof values after fixing with multible cationic salts (Cr, Al, Zr)  
         
Perfectol FCV 30% 6.0-8.0 emulsion of flour carbon polimers and special emulsifiers, for x
    anionic vegetable tanned leathers, also on dificult blue stock  
         
Perfectol HQ 48% 7.0-8.0 waterproof fatliquor for all soft leathers like garment and soft nappas,  
    anionic silky touch  
         
Perfectol QT 52% 6.5-8.5 emulsion of special oils and silicons for high waterproof values,  
    anionic in combination with other waterproof fat liquors  
         
Perfectol WR 32% 6.0-8.0 special polimers with aditives for all kind of waterproof leathers, x
    anionic good lightfastness, good grain thightness, silky dry touch  

Last Updated on 01/08/2001
By Heinz G. Uebele
Email: heinz@helachemicals.com