| Chemtan line of products | ||||
| Tanning | ||||
| Solids or | pH | |||
| Product | active materia | Charge | Characteristics | New |
| Chemtan N 34 R | 98% | magnesium oxide basifier, uniform and controled reactivity, eficiant | ||
| crome exhoust, flat pH curve, no spicking, lighter color of tanning, | ||||
| good grain firmness | ||||
| Chemtan N 34 | 98% | magnesium oxido basifier, reactivity is controled by temperature, | x | |
| low temperature-low reactivity, high temperature-high reactivity | ||||
| Chemtan N 36 | 25% | 6.5-7.5 | neutral salt of an complex organic acid, masking and basifying crome | |
| anionic | tannage for improved crome exhuast, buffered neutralization | |||
| Retanning, Dyeing, Special Products | ||||
| Solids or | pH | |||
| Product | active materia | Charge | Characteristics | New |
| Chemtan A 55 | 100% | 8.5-9.5 | complex of a aminohidroxy compound, increasing perspiration | |
| anionic | resistance, no efect on waterproof values, better crome exhaustion, | |||
| increases pH without problems of loose grain, fuller and fluffier leathers | ||||
| Chemtan M 35 | 85% | 0.2-0.6 | acid zircionium sulfate, 0% basicity, provides grain thightness and | |
| cationic | solidity of temper, for fixation of the waterprooof, retanning of splits, | |||
| side leathers penny loafer type and firm waterproof leathers, reduces | ||||
| elongation of the leathers | ||||
| Chemtan T 13 | 96% | 8.0-9.5 | neutral naphthalene syntan for the tannage, retannage and neutralization | |
| anionic | of crome leathers, dispersing, bleaching and dye leveling agent, | |||
| pretanning of vegetable leathers, penetrator of vegetable extracts | ||||
| for wet white retannage | ||||
| Chemtan T 25 | 38% | 6.0-7.5 | buffering neutralization syntan, uniforme and complete penetration | |
| anionic | of crome tanned leather yielding a pH of aprox. 4.5, bleaching and | |||
| filling properties | ||||
| Chemtan E 32 | 50% | 6.5-7.5 | neutral phenolic syntan for the retannage of crome leathers, | |
| anionic | superior light resistence, controled free phenol content, bleaching, | |||
| filling, softening, dye leveling | ||||
| Chemtan E 33 | 50% | 3.0-4.0 | acid phenolic syntan for retannage of crome leathers, superior | |
| anionic | light resistence, controled free phenol contend, bleaching, filling, | |||
| softening, dye leveling | ||||
| Chemtan E 43 | 96% | 2.0-3.0 | highly adstringent acid phenolic syntan for natural shrunken grain | |
| anionic | efect on pickeled or crome tanned stock | |||
| Chemtan R 22 | 33% | 3.5-4.5 | quarternary resin for the fixation of anionic products as dyes and | |
| cationic | tanning agents, increased dye value, for sandwich dying | |||
| Chemtan R 24 | 30% | 4.0-5.0 | special amine resin to improve dye penetration without increasing | |
| cationic | the amount of alkali required in the dye sistem, firmer grain | |||
| Chemtan R 43 M | 45% | 7.5-9.0 | aminoaldehide resin for the retanning of crome leather, good filling | |
| anionic | and dyeing properties, replacing the crome retannage on splits | |||
| Cehmtan R 47 M | 47% | 8.0-9.0 | aminoaldehide resin for the retanning of crome leather, fine grain, | |
| anionic | good filling and softening, improves penetration of anionic products | |||
| Chemtan R 74 | 30% | 5.5-7.0 | soft acrilic resin for the retanning of crome leather, good filling and | |
| anionic | grain tightness, round feeling of the leathers, improves penetration | |||
| of other anionic products as waterproof agents and dyes | ||||
| Chemtan R 111 | 52% | 6.0-8.0 | soft special polymer with high molekular weight for the impregnation | |
| anionic | in drum for splits, nubucks, side leathers and waterproof | x | ||
| Chemtan Filler GL | 100% | lightfast proteinic filler, improves grain thightness, fullness of the | ||
| less compact partes of the leather and buffing, | ||||
| Chemtan M 39 | 52% | 6.5-7.5 | fire retardant salt for non combustible leathers for the use in drum | x |
| and in the finish | ||||
| Fatliquors | ||||
| Solids or | pH | |||
| Product | active materia | Charge | Characteristics | New |
| Chemol 2 | 40% | 8.5-9.5 | mayonnaise fatliquor, good surface lubrication, low elongation, | |
| anionic | good buffing properties | |||
| Chemol 57 | 75% | 5.5-6.5 | univrsal highly sulfated fatliquor with aditives, sperm oil replacement, | |
| anionic | good softening, firm grain, good light resistence | |||
| Chemol 195 C | 84% | 5.0-6.5 | bisulfited cod oil with aditives, very good softening, for all soft types | |
| anionic | of leathers, moderate richness | |||
| Chemol 236 | 75% | 6.0-7.0 | medium sulfated sintetic fatliquor for every type of leather, dry feeling, | |
| anionic | good buffing, good grain tightness, good light resistence | |||
| Chemol 237 | 64% | 5.5-6.5 | sintetic emulsifier with aditives, very good internal penetration, dye | |
| anionic | leveling, increased softness, fluffiness and strength | |||
| Chemol 240 | 71% | 5.0-6.5 | medium leveled solvent fatliquor with sintetic and natural base, | |
| anionic | clean surface, light feel, good softness, good grain tightness, | |||
| good light resistence | ||||
| Chemol 302 | 70% | 6.0-7.0 | medium sulfated fatliquor on animal base with very good light | |
| anionic | resistence, very good grain lubrication, good fullness and roundness | |||
| Chemol 346 | 71% | 6.0-7.0 | low leveled syntetic solvent fatliquor, exelent light resistence, very | x |
| anionic | clean surface, soft, round fluffy feelining, very good grain thightness | |||
| Chemol 377 | compact product containing al necesary fatliquors and retanning | x | ||
| anionic | agents for upholstery, car upholstery and nappas, low fogging | |||
| Waterproof Agents | ||||
| Solids or | pH | |||
| Product | active materia | Charge | Characteristics | New |
| Chemtan R 106 | 70% | 5.0-6.0 | modified special acrilic resin as base fatliquor for all kind of | x |
| anionic | waterproof leathers, low extractable, thight break, dry touch, | |||
| good softness and fullness | ||||
| Chemtan S 33 | 60% | 7.5-8.5 | silicone emulsion with aditives for drum treatment of waterproof | x |
| anionic | leathers, silky touch | |||
| Chemtan S 28 | 100% | solvent free silicone fluid for posttreatment of waterproof leathers | x | |
| in the finish, misclable with non polar solvents like white spirits | ||||
| Oils and Waxes for Wet Stuffinf in drum and Finish | ||||
| Solids or | pH | |||
| Product | active materia | Charge | Characteristics | New |
| Chemol 199 | 100% | non polar | waterresistant oiling off oil with good Maeser flex resistence, low | |
| water absorption, compatible with small silicone additions for | ||||
| increased flexes, fatty surface feel, for drum stuffing and finish | ||||
| Chemol 216 | 100% | non polar | waterresistent oiling off oil with good Maeser flex resistence, low | |
| water absorption, compatible with small silicone additions for | ||||
| increased flexes, fatty draggy surface feel, for drum stuffing and | ||||
| finish | ||||
| Chemol 287 | 88% | 6.5-7.2 | wet stuffing fatliquor for drum use only with low to medium | |
| anionic | pull up efect using alone, strong efects using together with solid | |||
| waxes as Chemol 322 or oils as Chemol 199, for full and heavy | ||||
| leathers, enriched surface and feeling | ||||
| Chemol 301 | 100% | non polar | high viscos oiling off oil for pull up efects, rich greasy surface feel | |
| Chemol 322 | 100% | non polar | solid blend of waxes and greases for wet stufing and finishing, | |
| melting point at aprox. 50°C, pleasant greasy waxy feeling, | ||||
| suitable for waterproof | ||||
| Chemol 325 | 100% | non polar | solid blend of waxes and greases for wet stuffing and finishing, | |
| melting point at aprox. 60°C, dry waxy surface feel | ||||
| Chemol 349 | 100% | non polar | viscos oiling off oil for pull up efects, silky smooth surface feel | x |
| Chemol 1345-1 | 100% | non polar | waterresistent oiling off oil with good Maeser flex resistence, | |
| dry surface feel, low to medium pull up efects, compatible with | ||||
| small silicone additions for increased flexes | ||||